UltraDuty II ESD Rubber Flooring
Price range: $7.35 through $14.70
Environmentally Sustainable Static Dissipative Flooring
UltraDuty II ESD Rubber Flooring combines the highest quality recycled SBR tire rubber and colorful reprocessed EPDM fleck to give the flooring a “blacklight” or glowing effect. These colors give off a radioactive look that burns all the old rules of flooring.
OVERVIEW
Environmentally Sustainable Static Dissipative Flooring
UltraDuty II ESD Rubber Flooring combines the highest quality recycled SBR tire rubber and colorful reprocessed EPDM fleck to give the flooring a “blacklight” or glowing effect. These colors give off a radioactive look that burns all the old rules of flooring.
Environmentally friendly and easy to install
- Single-ply, non-laminated
- Low VOC emissions
- Compiles with ASTM Sustainability Assessment
- Indoor and outdoor
- Outstanding slip-resistance
Style for indoor and outdoor environments
- Unbelievable durability
- Logo/graphic Inlays
- Available in rolls or tiles
- Consistent color (no wear layer)
Static Dissipative protection & safety
- Meets F150/ESD S7.1 standards
- Cushioned resilience
- Stain resistance
Passes ASTM F 170 Standards
UltraDuty II ESD Rubber Flooring combines the highest quality recycled SBR tire rubber and colorful reprocessed EPDM fleck to give the flooring a “blacklight” or glowing effect. These colors give off a radioactive look that burns all the old rules of flooring.
Not only dazzling, UltraDuty II has electrostatic dissipative properties that protect computers and electronic equipment from discharges that instantly corrupt valuable data and damages your hardware.
UltraDuty II ESD Rubber Flooring is the ultimate of high-tech flooring – with durability, comfort, and slip-resistance that’ll protect your valuable hardware and equipment.
Additional information
| Size | 12" Square, 24" Square |
|---|---|
| Color | Blue, Stone, Red, Golden, White |
Specifications
Dimensions:
| ROLLS: | 50′ x 4′ x 3.2mm |
| 50′ x 4′ x 1/4″ (6mm special – Min. 1600 sq. ft. increments ONLY) |
|
| 25′ x 4′ x 8mm | |
| TILE: | 36″ x 36″ |
| 18″ x 18″ | |
| Available in 3mm standard 6mm special – Min. 1600 sq. ft. increments ONLY |
Specifications:
|
Test
|
ASTM
|
SBR Rubber
|
| Tensile Strength |
D412
|
200 lb/in2
|
| Flexibility |
F137
|
Pass 1/4 inch mandrel
|
| Static Dissipation |
F150/ESD S7.1
|
106 to 109 Ohms
|
| Coefficient of Friction |
D2047
|
>0.9
|
| McBurney Indentation |
F142, 1 min
|
0.1120 inches
|
| Thermal Conductivity |
C518
|
0.406 BTU-in/hr-ft2-° F
|
| Static Load Limit |
F970, 400 lbs
|
<0.005 in
|
| Electrostatic Propensity |
AATCC Test Method 134
|
-0.8 kv
|
| Static Decay |
FTM 4046 of FS 101B
|
0.01 seconds
|
| Chemical Resistance |
F925
|
no change
|
| Impact Insulation Class |
E492
|
49
|
| Sound Transmission Coefficient |
E413
|
51
|
| Noise Reduction Coefficient |
C423
|
0.10 sabine/ft2
|
| Sustainability |
E2129-01
|
data collected
|
| VOC Washington State IAQ Test |
n/a
|
24 hr. = 0.39
1 wk = 0.056 |
Colors
Mr. Slate (FM-UD2-48-601)
Reviews
There are no reviews yet.